UsdGeomSphere (const UsdPrim &prim=UsdPrim ()) Construct a UsdGeomSphere on UsdPrim prim . UsdGeomSphere (const UsdSchemaBase &schemaObj) Construct a UsdGeomSphere on the prim held by schemaObj . virtual USDGEOM_API ~UsdGeomSphere () Destructor. USDGEOM_API UsdAttribute GetRadiusAttr () const Indicates the sphere's radius. USDGEOM_API UsdAttribute CreateRadiusAttr (VtValue const &defaultValue=VtValue (), bool writeSparsely=false) const See GetRadiusAttr() , and also Create vs Get Property Methods for when to use Get vs Create. USDGEOM_API UsdAttribute GetExtentAttr () const Extent is re-defined on Sphere only to provide a fallback value. USDGEOM_API UsdAttribute CreateExtentAttr (VtValue const &defaultValue=VtValue (), bool writeSparsely=false) const See GetExtentAttr() , and also Create vs Get Property Methods for when to use Get vs Create. UsdGeomGprim (const UsdPrim &prim=UsdPrim ()) Construct a UsdGeomGprim on UsdPrim prim . UsdGeomGprim (const UsdSchemaBase &schemaObj) Construct a UsdGeomGprim on the prim held by schemaObj . virtual USDGEOM_API ~UsdGeomGprim () Destructor. USDGEOM_API UsdAttribute GetDisplayColorAttr () const It is useful to have an "official" colorSet that can be used as a display or modeling color, even in the absence of any specified shader for a gprim. USDGEOM_API UsdAttribute CreateDisplayColorAttr (VtValue const &defaultValue=VtValue (), bool writeSparsely=false) const See GetDisplayColorAttr() , and also Create vs Get Property Methods for when to use Get vs Create. USDGEOM_API UsdAttribute GetDisplayOpacityAttr () const Companion to displayColor that specifies opacity, broken out as an independent attribute rather than an rgba color, both so that each can be independently overridden, and because shaders rarely consume rgba parameters. USDGEOM_API UsdAttribute CreateDisplayOpacityAttr (VtValue const &defaultValue=VtValue (), bool writeSparsely=false) const See GetDisplayOpacityAttr() , and also Create vs Get Property Methods for when to use Get vs Create. USDGEOM_API UsdAttribute GetDoubleSidedAttr () const Although some renderers treat all parametric or polygonal surfaces as if they were effectively laminae with outward-facing normals on both sides, some renderers derive significant optimizations by considering these surfaces to have only a single outward side, typically determined by control-point winding order and/or orientation . USDGEOM_API UsdAttribute CreateDoubleSidedAttr (VtValue const &defaultValue=VtValue (), bool writeSparsely=false) const See GetDoubleSidedAttr() , and also Create vs Get Property Methods for when to use Get vs Create. USDGEOM_API UsdAttribute GetOrientationAttr () const Orientation specifies whether the gprim's surface normal should be computed using the right hand rule, or the left hand rule. USDGEOM_API UsdAttribute CreateOrientationAttr (VtValue const &defaultValue=VtValue (), bool writeSparsely=false) const See GetOrientationAttr() , and also Create vs Get Property Methods for when to use Get vs Create. USDGEOM_API UsdGeomPrimvar GetDisplayColorPrimvar () const Convenience function to get the displayColor Attribute as a Primvar. USDGEOM_API UsdGeomPrimvar CreateDisplayColorPrimvar (const TfToken &interpolation=TfToken (), int elementSize=-1) const Convenience function to create the displayColor primvar, optionally specifying interpolation and elementSize. USDGEOM_API UsdGeomPrimvar GetDisplayOpacityPrimvar () const Convenience function to get the displayOpacity Attribute as a Primvar. USDGEOM_API UsdGeomPrimvar CreateDisplayOpacityPrimvar (const TfToken &interpolation=TfToken (), int elementSize=-1) const Convenience function to create the displayOpacity primvar, optionally specifying interpolation and elementSize. UsdGeomBoundable (const UsdPrim &prim=UsdPrim ()) Construct a UsdGeomBoundable on UsdPrim prim . UsdGeomBoundable (const UsdSchemaBase &schemaObj) Construct a UsdGeomBoundable on the prim held by schemaObj . virtual USDGEOM_API ~UsdGeomBoundable () Destructor. USDGEOM_API UsdAttribute GetExtentAttr () const Extent is a three dimensional range measuring the geometric extent of the authored gprim in its own local space (i.e. USDGEOM_API UsdAttribute CreateExtentAttr (VtValue const &defaultValue=VtValue (), bool writeSparsely=false) const See GetExtentAttr() , and also Create vs Get Property Methods for when to use Get vs Create. USDGEOM_API bool ComputeExtent (const UsdTimeCode &time, VtVec3fArray *extent) const If an extent is authored on this boundable, it queries the extent from the extent attribute, otherwise if ComputeExtentFunction is registered for the boundable's type, it computes the extent at time. UsdGeomXformable (const UsdPrim &prim=UsdPrim ()) Construct a UsdGeomXformable on UsdPrim prim . UsdGeomXformable (const UsdSchemaBase &schemaObj) Construct a UsdGeomXformable on the prim held by schemaObj . virtual USDGEOM_API ~UsdGeomXformable () Destructor. USDGEOM_API UsdAttribute GetXformOpOrderAttr () const Encodes the sequence of transformation operations in the order in which they should be pushed onto a transform stack while visiting a UsdStage 's prims in a graph traversal that will effect the desired positioning for this prim and its descendant prims. USDGEOM_API UsdAttribute CreateXformOpOrderAttr (VtValue const &defaultValue=VtValue (), bool writeSparsely=false) const See GetXformOpOrderAttr() , and also Create vs Get Property Methods for when to use Get vs Create. USDGEOM_API UsdGeomXformOp AddXformOp (UsdGeomXformOp::Type const opType, UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionDouble , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add an affine transformation to the local stack represented by this Xformable. USDGEOM_API UsdGeomXformOp GetXformOp (UsdGeomXformOp::Type const opType, TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get an affine transformation from the local stack represented by this Xformable. USDGEOM_API UsdGeomXformOp AddTranslateXOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionDouble , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a translation about the X-axis to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddTranslateYOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionDouble , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a translation about the Y-axis to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddTranslateZOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionDouble , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a translation about the Z-axis to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddTranslateOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionDouble , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a translate operation to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetTranslateXOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a translation about the X-axis from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetTranslateYOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a translation about the Y-axis from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetTranslateZOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a translation about the Z-axis from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetTranslateOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a translate operation from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddScaleXOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a scale operation about the X-axis to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddScaleYOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a scale operation about the Y-axis to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddScaleZOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a scale operation about the Z-axis to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddScaleOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a scale operation to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetScaleXOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a scale operation about the X-axis from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetScaleYOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a scale operation about the Y-axis from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetScaleZOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a scale operation about the Z-axis from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetScaleOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a scale operation from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddRotateXOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a rotation about the X-axis to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetRotateXOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a rotation about the X-axis from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddRotateYOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a rotation about the Y-axis to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetRotateYOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a rotation about the Y-axis from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddRotateZOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a rotation about the Z-axis to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetRotateZOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a rotation about the Z-axis from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddRotateXYZOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a rotation op with XYZ rotation order to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetRotateXYZOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a rotation op with XYZ rotation order from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddRotateXZYOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a rotation op with XZY rotation order to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetRotateXZYOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a rotation op with XZY rotation order from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddRotateYXZOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a rotation op with YXZ rotation order to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetRotateYXZOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a rotation op with YXZ rotation order from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddRotateYZXOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a rotation op with YZX rotation order to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetRotateYZXOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a rotation op with YZX rotation order from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddRotateZXYOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a rotation op with ZXY rotation order to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetRotateZXYOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a rotation op with ZXY rotation order from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddRotateZYXOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a rotation op with ZYX rotation order to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetRotateZYXOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a rotation op with ZYX rotation order from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddOrientOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionFloat , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a orient op (arbitrary axis/angle rotation) to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetOrientOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get an orient op (arbitrary axis/angle rotation) from the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp AddTransformOp (UsdGeomXformOp::Precision const precision=UsdGeomXformOp::PrecisionDouble , TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Add a tranform op (4x4 matrix transformation) to the local stack represented by this xformable. USDGEOM_API UsdGeomXformOp GetTransformOp (TfToken const &opSuffix=TfToken (), bool isInverseOp=false) const Get a tranform op (4x4 matrix transformation) from the local stack represented by this xformable. USDGEOM_API bool SetResetXformStack (bool resetXform) const Specify whether this prim's transform should reset the transformation stack inherited from its parent prim. USDGEOM_API bool GetResetXformStack () const Does this prim reset its parent's inherited transformation? USDGEOM_API bool SetXformOpOrder (std::vector< UsdGeomXformOp > const &orderedXformOps, bool resetXformStack=false) const Reorder the already-existing transform ops on this prim. USDGEOM_API std::vector< UsdGeomXformOp > GetOrderedXformOps (bool *resetsXformStack) const Return the ordered list of transform operations to be applied to this prim, in least-to-most-local order. USDGEOM_API bool ClearXformOpOrder () const Clears the local transform stack. USDGEOM_API UsdGeomXformOp MakeMatrixXform () const Clears the existing local transform stack and creates a new xform op of type 'transform'. USDGEOM_API bool TransformMightBeTimeVarying () const Determine whether there is any possibility that this prim's local transformation may vary over time. USDGEOM_API bool TransformMightBeTimeVarying (const std::vector< UsdGeomXformOp > &ops) const This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. Determine whether there is any possibility that this prim's local transformation may vary over time, using a pre-fetched (cached) list of ordered xform ops supplied by the client. USDGEOM_API bool GetTimeSamples (std::vector< double > *times) const Sets times to the union of all the timesamples at which xformOps that are included in the xformOpOrder attribute are authored. USDGEOM_API bool GetTimeSamplesInInterval (const GfInterval &interval, std::vector< double > *times) const Sets times to the union of all the timesamples in the interval, interval, at which xformOps that are included in the xformOpOrder attribute are authored. USDGEOM_API bool GetLocalTransformation (GfMatrix4d *transform, bool *resetsXformStack, const UsdTimeCode time=UsdTimeCode::Default ()) const Computes the fully-combined, local-to-parent transformation for this prim. USDGEOM_API bool GetLocalTransformation (GfMatrix4d *transform, bool *resetsXformStack, const std::vector< UsdGeomXformOp > &ops, const UsdTimeCode time=UsdTimeCode::Default ()) const This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. Computes the fully-combined, local-to-parent transformation for this prim as efficiently as possible, using a pre-fetched (cached) list of ordered xform ops supplied by the client. UsdGeomImageable (const UsdPrim &prim=UsdPrim ()) Construct a UsdGeomImageable on UsdPrim prim . UsdGeomImageable (const UsdSchemaBase &schemaObj) Construct a UsdGeomImageable on the prim held by schemaObj . virtual USDGEOM_API ~UsdGeomImageable () Destructor. USDGEOM_API UsdAttribute GetVisibilityAttr () const Visibility is meant to be the simplest form of "pruning" visibility that is supported by most DCC apps. USDGEOM_API UsdAttribute CreateVisibilityAttr (VtValue const &defaultValue=VtValue (), bool writeSparsely=false) const See GetVisibilityAttr() , and also Create vs Get Property Methods for when to use Get vs Create. USDGEOM_API UsdAttribute GetPurposeAttr () const Purpose is a classification of geometry into categories that can each be independently included or excluded from traversals of prims on a stage, such as rendering or bounding-box computation traversals. USDGEOM_API UsdAttribute CreatePurposeAttr (VtValue const &defaultValue=VtValue (), bool writeSparsely=false) const See GetPurposeAttr() , and also Create vs Get Property Methods for when to use Get vs Create. USDGEOM_API UsdRelationship GetProxyPrimRel () const The proxyPrim relationship allows us to link a prim whose purpose is "render" to its (single target) purpose="proxy" prim. USDGEOM_API UsdRelationship CreateProxyPrimRel () const See GetProxyPrimRel() , and also Create vs Get Property Methods for when to use Get vs Create. USDGEOM_API void MakeVisible (const UsdTimeCode &time=UsdTimeCode::Default ()) const Make the imageable visible if it is invisible at the given time. USDGEOM_API void MakeInvisible (const UsdTimeCode &time=UsdTimeCode::Default ()) const Makes the imageable invisible if it is visible at the given time. USDGEOM_API TfToken ComputeVisibility (UsdTimeCode const &time=UsdTimeCode::Default ()) const Calculate the effective visibility of this prim, as defined by its most ancestral authored "invisible" opinion, if any. USDGEOM_API UsdAttribute GetPurposeVisibilityAttr (const TfToken &purpose=UsdGeomTokens ->default_) const Return the attribute that is used for expressing visibility opinions for the given purpose. USDGEOM_API TfToken ComputeEffectiveVisibility (const TfToken &purpose=UsdGeomTokens ->default_, const UsdTimeCode &time=UsdTimeCode::Default ()) const Calculate the effective purpose visibility of this prim for the given purpose, taking into account opinions for the corresponding purpose attribute, along with overall visibility opinions. USDGEOM_API PurposeInfo ComputePurposeInfo () const Calculate the effective purpose information about this prim which includes final computed purpose value of the prim as well as whether the purpose value should be inherited by namespace children without their own purpose opinions. USDGEOM_API PurposeInfo ComputePurposeInfo (const PurposeInfo &parentPurposeInfo) const This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. Calculates the effective purpose information about this prim, given the computed purpose information of its parent prim. USDGEOM_API TfToken ComputePurpose () const Calculate the effective purpose information about this prim. USDGEOM_API UsdPrim ComputeProxyPrim (UsdPrim *renderPrim=NULL) const Find the prim whose purpose is proxy that serves as the proxy for this prim, as established by the GetProxyPrimRel() , or an invalid UsdPrim if this prim has no proxy. USDGEOM_API bool SetProxyPrim (const UsdPrim &proxy) const Convenience function for authoring the renderProxy rel on this prim to target the given proxy prim. SetProxyPrim (const UsdSchemaBase &proxy) const USDGEOM_API GfBBox3d ComputeWorldBound (UsdTimeCode const &time, TfToken const &purpose1=TfToken (), TfToken const &purpose2=TfToken (), TfToken const &purpose3=TfToken (), TfToken const &purpose4=TfToken ()) const Compute the bound of this prim in world space, at the specified time, and for the specified purposes. USDGEOM_API GfBBox3d ComputeLocalBound (UsdTimeCode const &time, TfToken const &purpose1=TfToken (), TfToken const &purpose2=TfToken (), TfToken const &purpose3=TfToken (), TfToken const &purpose4=TfToken ()) const Compute the bound of this prim in local space, at the specified time, and for the specified purposes. USDGEOM_API GfBBox3d ComputeUntransformedBound (UsdTimeCode const &time, TfToken const &purpose1=TfToken (), TfToken const &purpose2=TfToken (), TfToken const &purpose3=TfToken (), TfToken const &purpose4=TfToken ()) const Compute the untransformed bound of this prim, at the specified time, and for the specified purposes. USDGEOM_API GfMatrix4d ComputeLocalToWorldTransform (UsdTimeCode const &time) const Compute the transformation matrix for this prim at the given time, including the transform authored on the Prim itself, if present. USDGEOM_API GfMatrix4d ComputeParentToWorldTransform (UsdTimeCode const &time) const Compute the transformation matrix for this prim at the given time, NOT including the transform authored on the prim itself. UsdTyped (const UsdPrim &prim=UsdPrim ()) Construct a UsdTyped on UsdPrim prim . UsdTyped (const UsdSchemaBase &schemaObj) Construct a UsdTyped on the prim held by schemaObj . virtual USD_API ~UsdTyped () Destructor. bool IsConcrete () const Returns whether or not this class corresponds to a concrete instantiable prim type in scene description. bool IsTyped () const Returns whether or not this class inherits from UsdTyped . bool IsAPISchema () const Returns whether this is an API schema or not. bool IsAppliedAPISchema () const Returns whether this is an applied API schema or not. bool IsMultipleApplyAPISchema () const Returns whether this is an applied API schema or not. UsdSchemaKind GetSchemaKind () const Returns the kind of schema this class is. USD_API UsdSchemaBase (const UsdPrim &prim=UsdPrim ()) Construct and store prim as the held prim. USD_API UsdSchemaBase (const UsdSchemaBase &otherSchema) Construct and store for the same prim held by otherSchema. virtual USD_API ~UsdSchemaBase () Destructor. UsdPrim GetPrim () const Return this schema object's held prim. SdfPath GetPath () const Shorthand for GetPrim() ->GetPath() . USD_API const UsdPrimDefinition * GetSchemaClassPrimDefinition () const Return the prim definition associated with this schema instance if one exists, otherwise return null. USD_API operator bool () const 
Inheritance diagram for UsdGeomSphere:
1.9.6 
